Right I've got Flawless and at the moment I'm just streaming it via the computer,so far so good.
Anyone got an idiot guide for installing it on my Vu+Solo?
You want to use the enigma2 script, if you join the facebook group it talks you through.
Download this:https://lookaside.fbsbx.com/file/Zgemma%20%26%20Enigma2%20setup%20for%20Full%20Package%20install%20only.docx?token=AWx6lp4Mbz155liTb5Z5-uoZV6DNHlY0IASg85PhSIqSfmWqAhehIkFWG2xBoA-jusMI9oz1CCYR583VIjWGQmSzK1FokVIYAxMCsUy9NoU5mbuR141FJjDead_YC9D2d38JsvEJ280w9T-E0-0v8DBsRLF2jDFG5sFlriF2i7wGsjDxevmbXFxzFyZfTXrlkl9x9YrlXapGLo-d7knXgJbnIt has pretty pictures in to help.
IMPORTANT READ THE FOLLOWING INSTRUCTIONS FIRST BEFORE RUNNING THE SCRIPT
THIS IS FOR INSTALLS OF THE FULL PACKAGE INSTALLS ONLY
THIS SCRIPT IS NOT FOR PEOPLE WHO LIKE TO HIDE OR DELETE BOUQUETS, AS THAT IS LIKELY TO MESS YOUR BOUQUETS UP AND WILL MORE THAN LIKELY REQUIRE A REFLASH.
The following will set up Flawless on most Enigma2 devices including the Zgemma i55, that already have an existing image. Openatv is the recommended image but will work on most other images i.e Vix, Ipab whooshbuild etc. The Star 2s is not supported as they do not work well enough with IPTV, and I advise against installing the script on one. Also the Amiko devices are too problematic to recommend or support.
If using a Bouquet maker on the box, Autobouquets 28.2 is not supported and AutoBouquetsMaker is recommend instead.
It is recommended that have a USB or Hard drive connected to the box for EPG storage.
Putty can be downloaded at
http://www.chiark.greenend.org.uk/~sgtatham/putty/download.htmlIf using a Mac there are instructions at the end of the document for an alternative to Putty
First open Putty, and in the HostName (or IP address) box enter the enigma2 boxes IP address, and then click the Telnet radio button and click open
And then log in using the word, root
http://flawless-iptv.xyz/generator/ Enter your Flawless username in the “Your username” box and your Flawless password in the “Your password” box and click the “Full Pack” button and click the “Generate” button.
Now click on the “copy script” button and paste the script into putty, as per the example below.
This will then start the install (if it does not start automatically hit enter), once the install finishes it will then restart the box automatically.
You will now have the original Main IPTV bouquet which has all the Flawless channels without any EPG. Then there are 12 Movie bouquets in categories, 1 PPV & Sport bouquet, 1 24/7 bouquet, 1 Stand Up Comedy bouquet and 11 TV Series box sets bouquet's which also have no EPG,
There are also 20 custom TV channel bouquets that all have EPG as in the screenshots below.
The EPG scan will have started in the background on install and will be populating on its own.
All that you need to do now is Restart Gui daily by going to Menu – Standby/Restart – Restart Gui and that
will update the files for you.
Problem Solver
1: Problem:
There is a version of Putty for Mac but is not very good.
Solution:
Open Applications ->Utilities ->
Type the following command telnet 192.168.X.X (change the IP address to the one for the Zgemma/Enigma2 boxes)
Enter the username root (and password if you have set one) and press enter
Then follow the instructions above.
2: Problem:
Install stops saying Downloading IPTV Bouquet
Solution:
Please check the script has been pasted exactly as it was created by the generator as either the Flawless server is refusing connection due to wrong username or password or both. Check
that the username and password are correct and your Flawless subscription is still live.
Or you are being blocked from connecting to the Flawless server, please check that your ISP’s internet blockers are off and that the router is allowing IPV4 connections if your ISP provider has changed their router settings. Please click the link below for the document on how to turn off Internet blockers from the main ISP’s.
http://clearlabel.xyz/InternetBlockers.pdf 3: Problem
After a few days, the EPG stops updating and starts disappearing
Solution
The box needs restarting daily to keep all things updated including EPG. Either go to Menu – Standby/Restart – Restart Gui daily
or set up a Power timer to do it automatically go to Menu—Timers – PowerTimers press the green Add button and then change Timer type to reboot system and then when you want it to reboot at.
4: Problem:
You Restart the box and some or all the bouquets are listed as N/a
Solution:
This happens when the box hasn’t had a proper internet connection for whatever reason as the pre-start stage of start-up of the box itself. Check Internet and restart gui.
The box needs restarting daily to keep all things updated including EPG. Either go to Menu – Standby/Restart – Restart Gui daily
or set up a Power timer to do it automatically go to Menu—Timers – PowerTimers press the green Add button and then change Timer type to reboot system and then when you want it to reboot at.
5: Problem:
If using IPAB and the Flawless Bouquets vanish.
Solution:
IPAB has its own customised version of a well-known bouquet maker and have stripped out some options. Go to Menu -- Setup -- Service searching -- Advanced bouquet management -- Sly bouquets -- Then the boxes need to be ticked for the Flawless bouquets
Then you need to populate the database
6: Problem:
If using AutoBouquetsMaker and the Flawless Bouquets vanish.
Solution:
Whilst watching a channel press the down button on the remote, the one below the OK button
Then press the blue favourites button
Highlight a bouquet then press menu
Is the option “Restore deleted user bouquets” available?
Click on the Restore deleted user bouquets, this will restore the bouquets in a totally different order than originally where to resolve that follow the instructions below.
Whilst watching a channel press the down button on the remote, the one below the OK button.
then press the blue favourites button
highlight the bouquet that you want to move first, then press menu
enable move mode and then you can move the bouquets to where u want.
once you have them all in the order you want do the same process again and disable move mode.
Then go to Menu – Setup – Service Searching – AutoBouquetsMaker – Configure – Change Keep all non-ABM bouquets to yes.
Links to the main Image providers
OpenAtv Image downloads via
https://www.opena.tv/downloads/1-openatv-5-3-images/Whoosbuild image downloads via
http://www.techkings.org/resources/IPAB image downloads via
http://ipab.tv/OpenVix image downloads via
http://www.openvix.co.uk/How to remove the script
Connect as per the instructions above to the box, and once logged in as root copy and paste the script below.
wget -O script.sh1
http://clearlabel.xyz/DeleteScript.txt && chmod +x script.sh1 && ./script.sh1
and then press enter, it will then uninstall and reboot